Our 300 Gallon food-grade water storage tank/reservoir is the perfect solution for fresh RO water storage in your Lab. With a 34” Diameter footprint and a 83” height, our 300 Gallon tank will allow for on-demand water for washing, collecting and cleaning throughout your lab.  

This product features/includes:

• 300 Gallon Food-Grade Water Tank
  
• 34” Diameter x 83” Height
• Cylindrical Design for efficient storage & minimal footprint

After going through thousands and thousands of dollars of simple Wash Bags, our team finally found Rosin Evolution's Wash Bags. We instantly fell in love. Obviously price is a big factor, but the value is absolutely unmatched. Micron accurate, fast draining, and quality stitches throughout, these wash bags have our stamp of approval! 

Reduce those draining times, save thousands of dollars a year on wash bags, pick yourself up some Rosin Evolution Wash Bags today!

The 8 bag set includes -  220u, 190u, 160u, 120u, 90u, 73u, 45u, 25u

The 4 Bag set includes - 220u, 160u, 90u, 45u (no substitutions)

The Lowtemp Cage Kit is an evolution/upgrade to the OG Lowtemp plate kits. Designed and manufactured out of Denver, Colorado with certified American alloys guarantee a quality of product to last an entire lifetime. Chinese knockoffs use alloys that vary in composition which can lead to bending/warping.

Benefits include, but are not limited to:

- Plates on a spring guided track to prevent any misalignment.

- No risk in failure or wiggle of mounting on the top plate with prolonged usage.

- Increased heat management. Less contact with the ram of the press helps control heat transfer. This can be an important feature in presses where the ram is actually a part of the hydraulics. 

Specs:

• Made in USA with Lifetime Warranty on Cage, and 1 year warranty on electronics. 
• Universally compatible with all shop presses. Plug and play in less than 5 minutes. Questioning which press to go with? Click here to learn the differences.
• 11lbs
• 10"L x 4"W x 4.5"H
• Max 4 amp draw at 110v
• Available in 230v for international customers as well! We will automatically ship you a 230v if your country requires it.
• Manufactured out of Billet Aircraft Grade 6061-T6 American Certified Aluminum
• Precision manufactured rods/bearings/springs to ensure smooth travel

This product includes:

• 4"x7" Lowtemp Cage. Our Cage will always be sold with pressing plates installed unless otherwise instructed. 
• Digital controller with installed heating elements. Our heat sensors drill directly into the plate, giving you an EXACT platen temperature. We won't waste your time with weak enail coils and candy thermometers like our competitors!
• All mounting hardware and accessories required for full assembly.
• Lifetime warranty on the springs, cage, and plates. 1 year full warranty on the controller. After the one year, we will fix the controller at cost of shipping and parts. We will not charge for labor!
• Two Fiberglass based G11 insulation plates.

Why Insulate? - We offer the option to lengthen the shoulder bolts and springs, and isolate the platens from the rest of your cage with G11 insulation. This increases efficiency of the controller, increases the life of the electronics, and speeds up heat time. It also has the added benefit of reducing the heat transfer to your hydraulic ram on your press. 

Why Anodize? - Anodizing is a food grade finish that is used to encompass the aluminum in a harder than steel finish to protect the metal. It allows for easier cleaning of the platens by sealing the pores, whilst lookin' pretty frickin sweet! 

Note: Cage Kit's do not fit on 6 Ton A Frame Presses. Total height of cage is 4.5" (5.5" with Insulated Cage Option)

Pre Cut Parchment Paper makes the process of pressing so much easier, faster, clean, and organized. All parchment here is 35lb which is extra thick, preventing tearing and leaking during pressing. It also makes for an easier collection of oils off of the parchment. It's a must have for anyone serious about their extractions. 

Sizes-

8"x16": Great for all sizes and styles of Rosin Presses! 

8"x8" Waterfall Inserts: These are designed to create a little pouch insert for the directional flow puck. Designed for 1-2 uses per press, we highly recommend to use these with our 16"x24" Die Cut Waterfall Collection Sheet! This system is designed for high output processing. 

16"x24" Die Cut Waterfall Collection Sheet: Designed specifically for our 4x7 V2 Lowtemp Press. This system along with the 8"x8" inserts, allows for bulk processing quickly, efficiently, and tidy. Simply put your put in the 8"x8" insert, fold it up, put it in the Collection Sheet, and press away! When your press is complete, toss the insert and puck to the side, and insert the next puck. Reuse your Waterfall Collection Sheet as many times as you'd like or until it's full of rosin. Once your pressing is done, you'll have a large slab for a single collection point saving the headache of collection and a thousand pieces of parchment all over your work area! 

Pre Cut Parchment Paper makes the process of pressing so much easier, faster, clean, and organized. All parchment here is 35lb which is extra thick, preventing tearing and leaking during pressing. It also makes for an easier collection of oils off of the parchment. It's a must have for anyone serious about their extractions. 

Sizes-

8"x16": Great for all sizes and styles of Rosin Presses! 

8"x8" Waterfall Inserts: These are designed to create a little pouch insert for the directional flow puck. Designed for 1-2 uses per press, we highly recommend to use these with our 16"x24" Die Cut Waterfall Collection Sheet! This system is designed for high output processing. 

16"x24" Die Cut Waterfall Collection Sheet: Designed specifically for our 4x7 V2 Lowtemp Press. This system along with the 8"x8" inserts, allows for bulk processing quickly, efficiently, and tidy. Simply put your put in the 8"x8" insert, fold it up, put it in the Collection Sheet, and press away! When your press is complete, toss the insert and puck to the side, and insert the next puck. Reuse your Waterfall Collection Sheet as many times as you'd like or until it's full of rosin. Once your pressing is done, you'll have a large slab for a single collection point saving the headache of collection and a thousand pieces of parchment all over your work area! 

• 1.5" Tri Clamp Sanitary Connections
• 90 Degree Elbow
• Stainless Steel

CAUTION! 

This bundle is an UPGRADE ONLY! This bundle is used to add a V2 press to an EXISTING Medusa build. 

Bundle Includes:

• 4x7 V2 Press (Short)
• LT3 Heat Controller with Pressure Sensor
• V2 Kit
• Legs
• 20 Ton Cylinder
• 3ft Hydraulic hose with 2 Male Quick Connects

BEcom Water Chiller

BE-CHIL-300LT

The BEcom Water Chiller delivers consistently chilled water in a small footprint. This is an all in one 79 gallon water chiller with float valve pre installed. 

We purchased this unit to test and make sure it was up to our quality standards. Generally speaking, this product doesn't match Lowtemp's quality standards. The unit we have came from the factory has a few small scratches on it, and there is a small leak from the water inlet. However, for a person who is moderately handy and loves a great deal, this is a fantastic option. 

We have this priced at $4,995.

The function is actually pretty strong, and it keeps water extremely cold, even building ice at full blast. 

Compressor size: .5 Hp

Compressor Type: Hermetic

Water connections:

-20mm Water Input

-25mm Cold Water

-25mm Cleaning

-25mm Overflow

Water Cooling Capacity: 21 Gal @ 34°F / Hour

Shipping Weight W/ Pallet 323 Lbs 

THIS PRODUCT IS STRICTLY FOR PREVIOUS CUSTOMERS WHO OWN ANY GENERATION OF OUR CAGE! Do not purchase with a new cage kit.

Upgrade your original Cage Kit with this Insulation Kit! Simply take your cage apart, add in the new custom hardware, and reassemble. This helps lengthen the lifespan of your electronics, increase temperature stability, and decrease heat up time.  In instances where the ram is a part of the hydraulic press (Example: Dake B10 Press), it also reduces the heat transfer to the hydraulics, prolonging the life of the internal hydraulic seals. 

Installation of this kit takes about 10 minutes maximum. 

Input room temp tap water, and get out ice cold ~35f RO water on demand! 

Our 300gal Chilled Water Skid setups include the complete turnkey system for your chilled water management. Our system will include all necessary fittings, valves, hoses, pumps, sprayer, chiller, and 300gal storage tank for efficient cold-water management.

This product includes: