Ice Water Extraction: How It Works, Its Benefits, and Tips for Better Hash

Ice Water Extraction

Ice water extraction is a solventless method of making cannabis concentrates that uses water, ice, and agitation. The cold water and movement break the trichome heads free, and a series of mesh filter bags collect them as they fall to the bottom of the vessel. Once dried, the result is bubble hash, also called ice water hash.

The method produces a pure and clean extract with no solvents, and none of the risk of burns that comes with the dry ice method.

Dried bubble hash from an ice water wash

What Ice Water Extraction Does

In cannabis, extraction means separating the trichome heads from the plant material. The trichome heads contain the cannabinoid and terpene-rich resin that gives the plant its signature aromas and flavors. Washing separates those heads cleanly from cannabis buds and sugar leaves, using mechanical separation rather than chemical solvents like butane, propane, ethanol, or supercritical CO2.

The finished extract goes by several names, including bubble hash, ice water hash, and IWE. The term “bubble hash” refers to the way the extract bubbles when dabbed.

The Ice Water Hash Extraction Process

  1. Prepare the material. Use fresh frozen or dried cannabis buds, popcorn size but not ground.
  2. Load it cold. The material goes into ice and cold water, or into pre-chilled water if you are washing without ice.
  3. Agitate. Stir the water by hand or let a machine move it until the trichome heads detach from the plant material. Our Osprey SOP recommends 10 to 25 minutes per wash, and 3 to 5 washes per batch is generally plenty.
  4. Let it settle. Give the vessel three to five minutes after each agitation cycle so the material separates before you pull.
  5. Filter. The water drains through a stack of mesh wash bags, largest micron sizes at the top and smallest at the bottom, and the trichome heads settle in one of the bags according to their size.
  6. Collect. Scoop the trichome heads out of each bag onto parchment lined trays.
  7. Dry. The wet hash needs to be dried before you can sell it, roll it into temple balls, or press it into hash rosin.
Frozen cannabis and ice being washed in a stainless steel hash washing vessel

How to Make Ice Water Hash by Hand

You can make ice water hash by hand with a bucket as your wash vessel, a hand paddle, ice, cold water, and a set of mesh wash bags. It’s best to have one vessel for agitation and one for your filtration bags, which results in cleaner hash.

Hand washing and machine washing can reach the same grade, and hand washing can still make some sense for a personal batch made for fun. What separates them is the physical cost and whether anyone else in your lab can get there without you standing over them. Run the Osprey SOP’s 3 to 5 washes at 10 to 25 minutes each by hand, and that is 30 to 125 minutes of arm powered agitation for a single batch.

Ice Water Extraction Machines

A professional hash washing machine should automate the agitation and allow for temperature control, speed control, and the ability to set custom recipes. The Osprey SOP, for example, suggests 200 RPM and a 10 minute cycle when you are washing for full melt.

The Osprey uses a low shear, bottom mounted impeller in a rounded square vessel, so it is always mixing bottom over top in a constant vertical vortex. It washes up to 21,000 fresh frozen grams or 4,200 dry grams per batch. Allowing 2 hours to complete each batch, that is up to 84,000 fresh frozen or 16,800 dry grams within an 8 hour period. The vessel is passivated 304 stainless steel with double wall, closed cell foam insulation for consistent temperature regulation.

For smaller batches, the Mini Osprey is capable of washing 9,000 fresh frozen or 2,100 dry grams per run.

The Osprey commercial hash washing machine

Benefits of Ice Water Extraction

Method How the trichomes are separated Main drawback
Ice water hash Ice water and agitation, collected in mesh bags The hash has to be dried after the wash
Dry sift Sieving dried cannabis over a series of mesh screens Significant time and labor, and it does not reach true full melt
Dry ice hash Shaking cannabis in a bag with dry ice Dry ice is too cold, so trichome heads break apart instead of staying intact, and it carries a risk of burns
Hydrocarbon extracts Solvents like butane dissolve the cannabinoids and terpenes Residual solvent is purged or distilled out after extraction

Compared With Dry Methods

  • Ice water extracts contain less unwanted plant material than kief, unrefined dry sift, and dry ice hash.
  • They are less likely to be contaminated with dust particles than their dry counterparts, because the entire process takes place in water.
  • Ice water hash can often be dabbed directly with no further processing needed, and full melt can be dabbed on its own using a dab rig.

Compared With Solvent-Based Methods

No solvents are required, and ice water hash doesn’t undergo any purification or purging after extraction. That makes the method more accessible for small extraction companies that don’t have the capital to invest in a safe, closed-loop solvent extraction system. It also means consumers can be confident that the starting material must have been top grade if the extract passes quality assurance testing.

Live Extracts and Rosin

Ice water hash can be made from fresh frozen cannabis, resulting in a “live” extract that contains almost the same terpene profile as the plant at the time of harvest. Freeze-dried live bubble hash is the most premium starting material for rosin.

What Decides Quality and Yield

Test Wash a New Strain

Not all strains wash well. Before a full run with a new cultivar, place around 1 oz of buds in a mason jar of ice-cold water, shake it vigorously for 10 to 15 minutes, and let the contents settle. The more trichomes at the bottom of the jar, the higher the yield you can expect when you wash the strain for bubble hash.

Start With Fresh Frozen Material

Fresh frozen cannabis is frozen almost immediately after harvest. Dried buds also wash, but fresh frozen will give you a live product that can fetch higher prices in dispensaries.

Use Clean, Cold Water

We strongly suggest filtering your tap water into RO (reverse osmosis) before using it to wash with, and if you’re using ice, make sure it’s being made with RO too. Cold temperatures keep the trichome heads brittle, minimize cannabinoid and terpene degradation, minimize chlorophyll leaching from the flower, and keep the hash from greasing up. A cold room or a room with an air conditioning system is ideal, and a chilled water skid stores up to 300 gallons of chilled water at a time.

Agitate Gently

A high shear agitator damages trichomes, while a low shear bottom mounted impeller moves the water column instead of tearing through it. Speed matters too. On the Osprey, if you can see the impeller because it’s mixing so aggressively, it’s likely too much speed.

Freeze Dry the Hash

We recommend freeze drying over air drying. A freeze dryer can dry hash in as little as 18 to 24 hours, compared with four to five days or more for air drying, and freeze dried hash is very light in color, which enhances its shelf appeal. Freeze drying also minimizes terpene loss and oxidation and protects the hash from external contamination, with little to no opportunity for mold growth. There is a very thin line between fully dried hash and overdried hash, so dial in your cycle.

Store It Cold and Airtight

Keep dried hash in an airtight container like a mason jar, in a fridge or freezer depending on how long you plan to store it. When you’re ready to use it, let the container come to room temperature before opening it, because condensation can form and potentially ruin your hash.

What You Can Sell From an Ice Water Wash

You can sell bubble hash as-is, press it into hash rosin, or use it to make infused edibles. Get your strains, washing, and drying processes right and you should have a product that can hold its own in the competitive cannabis industry. Whether you sell it as-is or press it into premium hash rosin, ice water hash can be a profitable product line with the right hash washing equipment.

FAQ

Is ice water hash solventless?

Yes. It is made with only water, ice, and agitation, and no solvents are used at any stage.

Is ice water hash the same as bubble hash?

Yes. Bubble hash, ice water hash, and IWE all refer to the same extract.

How long does an ice water hash wash take?

Our Osprey SOP recommends 10 to 25 minutes per wash and 3 to 5 washes per batch. For planning, it assumes about 2 hours for a full batch on the Osprey, and says to use that figure conservatively.

Can you wash hash without ice?

Yes. An iceless wash uses pre-chilled water in the washer instead of ice, and the water has to be chilled before the wash starts. In our ice vs iceless study, run on the Osprey with one strain at one lab, the iceless washes came out ahead on yield and operational efficiency, though we cannot guarantee the same results with a different hash washing machine.

What equipment do you need for ice water extraction?

At minimum, a wash vessel, a way to agitate the water, mesh wash bags, cold water and ice, and a way to dry the hash. Many commercial labs add a hash washing machine, an ice machine or chilled water skid, and a freeze dryer.

Wash Hash With Lowtemp

We carry equipment for each stage of an ice water wash, including the Osprey and Mini Osprey washers, chilled water skids, and freeze dryers. Talk to a Lowtemp solventless expert about the right setup for your volume.

Levi Lanzrath is a cannabis extraction expert and founder of Lowtemp Industries.