Made of 100% USA cotton, this textile is durable, comfortable, and virtually shrink-free, thanks to the garment dye process. This crew neck shirt is cut with a spacious fit in the sleeves and torso, making it relaxed and versatile enough to wear with anything.
Mismatched Scratch and Dent 4x7 Cage Kit ONLY
*You will receive a chef's choice mixed color, scratch and dent platen set. No color requests.*
The Lowtemp Cage Kit is an evolution/upgrade to the OG Lowtemp plate kits. Designed and manufactured out of Denver, Colorado with certified American alloys guarantee a quality of product to last an entire lifetime. Chinese knockoffs use alloys that vary in composition which can lead to bending/warping.
Benefits include, but are not limited to:
- Plates on a spring guided track to prevent any misalignment.
- No risk in failure or wiggle of mounting on the top plate with prolonged usage.
- Increased heat management. Less contact with the ram of the press helps control heat transfer. This can be an important feature in presses where the ram is actually a part of the hydraulics.
Made in USA with Lifetime Warranty on Cage, and 1 year warranty on electronics.
Manufactured out of Billet Aircraft Grade 6061-T6 American Certified Aluminum
Precision manufactured rods/bearings/springs to ensure smooth travel
This product includes:
4"x7" Lowtemp Cage. Our Cage will alwaysbe sold with pressing plates installed unless otherwise instructed.
All mounting hardware and accessories required for full assembly.
**Anodizing color is Chef's Choice of mismatched colors, scratch and dent
Note: Cage Kit's do not fit on 6 Ton A Frame Presses. Total height of cage is 4.5" (5.5" with Insulated Cage Option)
No Scratch Work Bag
Whether hand washing, using a plastic washing machine, or using the Lowtemp Osprey, it's crucial to avoid metal zippers on work bags. These carbon steel metal zippers often have a zinc coating that flakes off into your material, and they can also scratch your expensive stainless steel vessels (impregnating carbon steel into the scratch, which can even start to rust or oxidize your ss vessel).
The Osprey Work Bag fixes this issue by only utilizing 100% food grade Nylon throughout the zipper material, zipper handle, and 220u filter. Safe to use with The Osprey, any stainless steel vessel or machine, plastic washing machine, and even a great solution for normal hand washers looking to avoid carbon steel in their wash!
Durable double stitching along seams
Velcro to secure zipper handle in place
Safe for use inside plastic or stainless steel washing machines
Can fit up to ~2,000g Fresh Frozen or ~400g Dry Material
Use up to 4 inside an Osprey for optimum results
Free Shipping in the USA
Black Osprey Hoodie- Champion Hoodie.
9.0 oz., 50/50 cotton/polyester
Made with up to 5% recycled polyester from plastic bottles
Two-ply hood with dyed-to-match drawcord
Durable cover-stitching throughout
Front pouch pocket
Champion logo on left sleeve
Brand New Summer 2022 Osprey Short-Sleeve T-Shirt
This super-soft, light weight tri-blend shirt is perfect addition to your summertime rotation. – it fits like a well-loved favorite. Made from an extremely soft, tri-blend fabric of 50% Poly/25% Cotton/25% Rayon.
Line your freeze-dryer trays with ease with our new heavy duty parchment liners. Available in packs of 500 for Small, Medium, & Large Freeze Dryer trays.
Our Billet All American Pre Presses are crafted to increase the amount of material that can be pressed in each squish, while preventing blowouts. Pre exposing the material to force is also known to increase yields slightly by even loading the bag and leaving no empty spots.
For 3x5 plates:
Inner Diameter: 3.5"L x 1.5"W x 2"H
For 4x7 plates:
Inner Diameter: 5.5"L x 2.5"W x 2"H
Weight 4 lbs
For those with shorter presses that have a diameter smaller than required, we recommend any standard1-ton Arbor Press when using a prepress.
Recycle Kits contain a bundle of all necessary pumps, hoses, remotes, ball valves, filters, clamps, gaskets to achieve sanitary hash water recirculation. There are two configurations:
Nest Recycle Kit - This is plug and play on any Osprey Nest. Contains:
1 Sanitary Recycle Pump
4 Ball Valves to Sanitary
1 7ft Hash Hose
2 Sanitary Filters
11 Clamps and Gaskets
1 90 elbow
25 ft Clear Tubing
1 Sanitary 3 Way
DIY Recycle Kit - Used to create your own recycle system with 20/32 gallon plastic cans.
1 Sanitary Recycle Pump
1 Step Bit
1 Stainless Steel Bulk head with Stainless Ball Valve to Sanitary
1 7ft Hash Hose
1 4ft Hash Hose
7 Clamps and Gaskets
1 90 elbow
Replacement Osprey Impeller
Hard Food Grade Anodized Monolithic Billet Aluminum Impeller with smooth ridges.
Does not chop up/blend material, rather it gently but thoroughly mixes the material, washing the trichome heads off of their stalks. This imitates the hand washing, full melt results that some desire.
The Lightweight Monolithic Impeller also gives us a perfectly balanced impeller, which extends the life of the motor, transmission, seals, etc drastically. Hard Anodizing seals the impeller from oxidization and creates a harder than steel coating.
Protective hard case for safe storage and handling
Replacement Osprey Tool Bag
2 x Impeller Bolts (No Adapter)
2 x Impeller Bolts (With Adapter)
8 x Adapter Mounting Bolts
2 x Stainless Steel Hex Keys
1 x Impeller Removal Tool
1 x Tool Bag
Sanitary Hash Hose
Many hoses have nooks and crannies that can trap plant material and hash water. They're often difficult or impossible to clean without taking apart. Our Lowtemp Sanitary Hash Hose are designed with a perfectly smooth FDA approved EPDM interior, that can be cleaned in place. They are also very well insulated, keeping water inside the lines ice cold.
These same hoses are used in the brewing and even dairy industries for transfer of fermented food product. The perfectly smooth interior allows for a true sanitary clean in place process, which lends itself well to the strict rules and regulations of microbial testing within the extraction industry.
Equipped with crimped sanitary 1.5" tri clamps on either end of the hose, quickly connect or disconnect from your pumps, bulkheads, or Lowtemp Nest in seconds.
Quit replacing your hoses after a few months to a year, and invest in high quality, long lasting Sanitary Hash Hoses!
Keep in mind, these hoses are fantastic solutions to use with chillers since they are so well insulated and react well with glycol. They increase the efficiency of chillers by a significant amount versus a normal nylon hose via the smooth interior and insulated walls.
Specs and Features
Temp Range: -31c/-24f to 120c/248f
Working pressure to 290 psi
Smooth FDA approved EPDM interior
Hose ID: 1"
Resistant to our preferred clean in place chemicals, such as Isopropyl and Alcojet
1.5" sanitary tri clamp connectors on both ends of the hose.
Scratch and Dent 4x7 V2 (no hydraulics) with LT2
This equipment has cosmetic flaws but will still function perfectly. If anything fails to function it will still be covered under our standard warranty.
This is the tall 4x7 V2 intended to be used with a bottle jack! Not BVA hydraulics
SEMI-AUTOMATIC DEPOSITOR “PUSH & GO”
The 8 Pistons Semi-Automatic Candy Depositor for chocolate, gummies, taffy, caramel, and hard candy is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide. It delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Semi-automatic Depositor comes with a complete heating system with temperatures ranging from 68F to 320F.
Filling Capacity: 5,000 – 8,000+ hourly
The Push & Go Candy Depositor ships with:
8 pistons assembly
12 Liters Hopper
Complete Heating System
Heavy Duty nozzles
Stainless steel XL hopper with cover
Stainless steel balls
Aluminum pallet carrier
Spare o-rings service pack
Dosage: 1.5 to 7 ml / 0.05 to 0.21 fl oz per pull
Capacity: 3.2 gal / 12 liter
Filling Capacity: 5,000 - 8,000+ hourly
Power Input : 100-240V AC/50-60Hz
Power Output : 24V DC / max.600W
Material: Stainless Steel
Maximum Heat : 320°F / 160°C
Warranty:12 Months from the date of purchase.
The complete Push & Go Depositor can be disassembled without tools for cleaning.
The Truffly Made Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low-heat confectionery ingredients, such as chocolate and ganache, as well as high-heat candy ingredients, such as caramel, gummies, and hard candy. The Universal Candy Depositor comes with a hopper with heated panels.
This Confectionery Depositor has a large hopper with heated panels
Easily adjustable shot size control.
Eight nozzles have adjustable centerlines to accommodate various mold configurations.
The Semi-Automatic Depositor works with molds up to 11.5 inches wide.
Nozzles are removable to accommodate molds with less cavities.
Heated panels help chocolate, caramel, or gummy products maintain temperature to flow properly.