Factory Seconds Sale

This event is your chance to buy Factory Seconds* of select Lowtemp products at unbeatable prices! Some items are brand new in perfect condition, just overstock items.

*Factory Seconds are cosmetically blemished products that are 100% serviceable. Seconds are sold as-is, and there are no provisions for hand-picking specific items. Factory Seconds are covered by Lowtemp Functional Warranties. 
Save $4,205.00
Quick view
Thermal Care NQA05 Chiller
Thermal Care NQA05 Chiller
$16,200.00 $11,995.00
Save $3,205.00
Quick view
BEcom Water Chiller 300 LT
BEcom Water Chiller 300 LT
$8,200.00 $4,995.00
Save $352.00
Quick view
*Factory Seconds* 3x5 V2 Press (short) No Heat Controller, No Hydraulics
*Factory Seconds* 3x5 V2 Press (short) No Heat Controller, No Hydraulics
$1,175.00 $823.00
Thermal Care NQA05 Chiller
Thermal Care NQA05 Chiller
Thermal Care NQA05 Chiller
Thermal Care NQA05 Chiller

Thermal Care NQA05 Chiller

$16,200.00 $11,995.00

This brand new chiller is a 5 ton unit/60,000 BTU water chiller. It utilizes 3 phase power. 

Accuchiller NQ Series Features

  • Control System provides diagnostics and precise temperature control
  • Environmentally friendly and energy efficient R410A refrigerant
  • Compact microchannel all aluminum air-cooled condensers for increased durability
  • High efficiency fans (air-cooled units only) with integral condensers feature totally enclosed air over (TEAO) motors for long life
  • Stainless steel brazed plate evaporators with flow and temperature safeties to guard against freezing
  • Reliable and energy efficient scroll compressors
  • Compressor staging for reduced energy use on 20 ton and larger units
  • Compressor , pump, and condenser fan starters (air-cooled units only) mounted in control panel and wired to motors
  • Remote 4-20 mA set point temperature input capability for increased application flexibility
  • Low voltage 24 VDC control keeps the control circuit signals free from AC interference
  • Internal insulated polyethylene reservoir
  • Removable inlet air filter (air-cooled units only) is easily cleaned and protects condenser coils to assure maximum efficiency
  • Tools-free removable doors
  • Solid state safety switches with electronic sensing devices
  • Hot gas bypass provides accurate capacity control and extends compressor life
  • Water regulating valve (water cooled units only) keeps refrigerant pressure constant
  • 18 month parts, and 12 month labor warranty

Added options

  • Extended Compressor Warranty - Extended Compressor Warranty extends the compressor parts warranty for an additional five years. Does not include labor, refrigerant or other chiller parts. Replacement compressor are shipped F.O.B. points of origin, freight collect or freight prepaid and invoiced.
  • Low Pressure Pump
  • Alarm Horn with Alarm Dry Contact 
BEcom Water Chiller 300 LT
BEcom Water Chiller 300 LT
BEcom Water Chiller 300 LT
BEcom Water Chiller 300 LT
BEcom Water Chiller 300 LT
BEcom Water Chiller 300 LT

BEcom Water Chiller 300 LT

$8,200.00 $4,995.00

BEcom Water Chiller

BE-CHIL-300LT

 

The BEcom Water Chiller delivers consistently chilled water in a small footprint. This is an all in one 79 gallon water chiller with float valve pre installed. 

We purchased this unit to test and make sure it was up to our quality standards. Generally speaking, this product doesn't match Lowtemp's quality standards. The unit we have came from the factory has a few small scratches on it, and there is a small leak from the water inlet. However, for a person who is moderately handy and loves a great deal, this is a fantastic option. 

We have this priced at $4,995.

The function is actually pretty strong, and it keeps water extremely cold, even building ice at full blast. 

 

MODEL

GALLONS

DIAMETER

HEIGHT

POWER

BE-CHIL-300LT

79

32"

69"

220V/1PH / 60HZ / 5.7AMPS

               

 

Compressor size: .5 Hp

Compressor Type: Hermetic

Water connections:

-20mm Water Input

-25mm Cold Water

-25mm Cleaning

-25mm Overflow

 

Water Cooling Capacity: 21 Gal @ 34°F / Hour

Shipping Weight W/ Pallet 323 Lbs 

*Factory Seconds* 3x5 V2 Press (short) No Heat Controller, No Hydraulics

*Factory Seconds* 3x5 V2 Press (short) No Heat Controller, No Hydraulics

$1,175.00 $823.00

30% Discount! Limited Supply!

This is PRESS ONLY!

BVA Hydraulics and controller must be purchased separately

These presses are discounted because of cosmetic flaws. They will still function perfectly and come with our Lifetime Warranty. 

Colors will vary.

 _______

The last press you buy: Period.

We designed this press with your space and portability constraints in mind. All the while, creating a press that will last you a lifetime. We kept the pressure options entirely open source so you can select the press style that works for you. For more budget friendly options, a simple $40 bottle jack can be used. If you want the best of the best, we carry High End BVA Hydraulics which come assembled, bled, and tested with pressure gauges installed. 

Our modular design makes any possible electronic warranty work extremely cheap to ship for fulfillment. Our competitors make you ship an entire press in for a simple electronic component failure or loose wire which can cost you hundreds in shipping fees.

LT2 vs LT3 Heat Controllers:

LT2 is a basic interface proprietary dual zone heat controller tuned for our presses. Simply utilize a dial and buttons to interface with the device, set your temperatures, and let it run! Only available with 110v North American Power.

LT3 is a brand new heat controller that is capable of much, much more. Record presses via Bluetooth connection to our software, receive over-the-air updates, record recipes, and track automatically calculated Platen PSI with a bright touchscreen interface. Available in 110v and 230v international.

 

Specs

  • Sturdy and Ultra Compact design. 10" tall, 10" long, 6" wide
  • 58 lbs
  • Complete Modular design
  • Anodized and insulated 4"x7" plates
  • Powder coated steel
  • Made in Denver, Colorado with Certified American alloys
  • Lifetime Warranty on the press 
  • 1 year full warranty on the electronics. After the one year, we fix everything at cost of parts, shipping, and labor. 
  • Universal force options up to 20 tons
  • Horizontal pressing capabilities

 

This product includes:

  • 4x7 Lowtemp Press backed with our Lifetime Warranty
  • LT2 or LT3
  • 2 Legs (used to bolt the press to the table or used to turn press horizontally) 
  • Mounting hardware to secure the legs to the press
  • FREE shipping via UPS Ground/Fedex Ground
  • Optional assembled and tested hydraulics of your choice

Options:

Press only: This option is for customers who already own a Lowtemp Plate or Cage kit, upgrading to our new Lowtemp Press with their current controller and adding their own hydraulics. All mounting accessories and hardware included. 4" taller to support bottle jacks.

Press with Controller: This option includes the Lowtemp Press with Controller. This is a full kit, which allows you to add your own bottle jack ($40). Great for high quality, portable, reliable, budget builds! This system's structure support rods are 4" longer to fit bottle jacks.

 

 

Press with Controller and BVA Hand Pump: This solution is out of the box, plug and play. All hydraulics come assembled, bled, and tested. Includes a 20 ton low profile BVA cylinder, ultra compact 2 speed aluminum pump, pressure gauge included.  **Option to upgrade for +$250 to our premium, high flow BVA P1000 pump. This features more travel per stroke and a longer handle for extra leverage. Ideal for high workloads**

 

Press with Controller and BVA Air pump: Requires an Air compressor. The pump is technically a foot pedal that is operated by stepping on a pedal, but can also be operated by hand pressure. 20 ton low profile cylinder, pressure gauge included.

 

 

 

 

Additional Options

  • Already own a set of our 3x5 or 4x7 plates/cage? Purchase our press without a controller to save some money. The controllers are the exact same! We will still include all hardware, legs, etc with the press.
  • If you choose to include a High End hydraulics kit, the components will come assembled. These kits consist of a low profile 20 ton cylinder, pump of your choice, hose, all necessary couplings, and a pressure gauge. 

NOTE: All color options are Limited Edition, and subject to quick stock changes. We will do everything possible to fulfill the color choice you choose, however they can cycle quickly.

This product cannot be shipped to a PO Box due to it's size/weight. For Domestic 48 state orders, we ship UPS, which won't deliver to a PO Box. 

NOTE-

NOTE- If you are purchasing a press in a country that utilizes 230v power, You need to purchase the variant with the 230v LT3 heat controller. This will come with an American style 110v grounded plug, but you are able to swap to the correct plug for your outlets, that will work in your country.

Â