Solventless THCA Separation Tutorial
Solventless THCA Separation Tutorial by @drysiftfullmelt
Things you will need:
25 Micron Filter
Rosin (Wax works best)
Take your wax and place it in a piece of pre cut parchment. Try to fold the wax into a square about 1/8"-1/4" thick. Place this wax square into 25 micron filter pouch. Cut off any excess material, to prevent any excess oil being soaked into the filter. Heat your plates to 130f-140f. Place the filtered wax into the press, and apply pressure VERY slowly. Once pressure is met, allow 30-60 seconds.
Most of the separation will have taken place on this first press, and you will be left with sauce on the parchment paper and THCA in the filter. If you wish, you can repeat this process at 200f and again at 300f (only do this in a stainless steel mesh due to temperature) for a clear/opaque shatter-like product.
"Dropped 2 drops of Lemon G x Death Star terps in the solventless THCA. Amazing!" - @Drysiftfullmelt on IG