How to Cure Rosin - Cold Curing vs Heat Curing
Rosin is often cured post-extraction to express the terpenes in a unique way, achieve specific textures, and extend the rosin’s shelf life at room temperature. "Curing rosin" means keeping rosin in a sealed glass jar at cool or warm temperatures for anywhere from a day to about a week until the desired texture is achieved. Some people also whip their rosin before or after the curing process.
Mechanical techniques can be used to achieve some of the same outcomes as rosin curing—THCA separation can be achieved with additional rounds of pressing, for example. However, the beauty of rosin curing techniques is that they require minimal effort (only time) and are highly effective at turning rosin into textures like badder and jam. Cold cured rosin is also the starting material for sauce and diamonds.
Why Cure Rosin?
The main reasons for curing rosin are to express the terpenes in a unique way, make the end product more shelf-stable at room temperature, and create a wider range of textures and consistencies than can be achieved with pressing alone. While you can technically dab rosin as soon as it flows out of the rosin press, curing allows you to create a complete line of products from a single concentrate (rosin) and potentially enhance the experience for the consumer. We explain additional benefits of curing in our article on fresh press vs cold cure rosin.
Differences Between Cold vs Heat Curing
There are two main ways to cure cannabis rosin: cold curing and warm curing (or "heat curing"). Cold curing results in a wet badder consistency and maximum terpene preservation, whereas heat curing is how rosin jam is made.
Texture and Consistency
Cold curing is typically used with solventless hash rosin or flower rosin. It’s the most common curing method because the resulting wet badder consistency is great for marketing and shelf appeal.
Heat curing is the only way to make rosin jam, and that is the only job we recommend it for. Some people warm their rosin to speed up a cold cure, but we don’t recommend it, because it makes the rosin drier. Sauce and diamonds are made by repressing cold cured rosin at low temperatures, not by heat curing.
Terpene Preservation
Cold curing is considered superior to heat curing in terms of terpene preservation because it doesn't raise the rosin above 70 °F. This is the temperature at which some terpenes begin to evaporate.
A jam heat cure runs at 180 to 200°F in the oven and then about 100°F on a heat mat, which is warm enough to make some terpenes volatile. As long as the lid stays sealed, terpene loss stays minimal.
Equipment Required
Cold curing can be performed with very basic equipment: a sealable jar and a cool, dark place that stays between 50°F and 70°F. Heat curing requires more specialized equipment: heat-proof glass jars, an oven with an oven thermometer, and a seedling heat mat with a temperature probe.
Whereas cold curing is very straightforward and comes with virtually no risks, heat curing requires regular monitoring because rosin left at high temperatures for too long could reduce to the point that it burns.
How Rosin Curing Works
During the curing process, the rosin nucleates. Nucleation refers to the beginning of a new thermodynamic phase in which crystal-like structures form inside a “metastable parent phase” such as a solution, liquid, or vapor. This process leads to the rosin "sugaring up" or "buddering up." Due to the formation of structures in the rosin, the terpenes are typically pushed to the top. When stirred back in, the terpenes can enhance the smell and create a wet-looking texture that is appealing to most consumers.
How to Cold Cure Rosin

To cold cure rosin, you'll store the sealed jar somewhere cool, between 50°F and 70°F. We recommend the following process for cold curing rosin:
- Scrape the rosin off the parchment paper with a collection tool.
- Add the rosin to the jar and seal the jar. You can seal it right away, or leave it uncapped until the rosin reaches room temperature. We recommend using UV-resistant jars to minimize light exposure. At a minimum, store the jar in a dark place.
- Keep the rosin between 50°F and 70°F and check it every 24 hours to monitor the nucleation process. At 70°F it usually takes 3 to 4 days; at 50°F, about a week.
- Once you observe a layer of terpenes on top of the nucleated rosin, whip the rosin to homogenize the extract.
- Store your cured rosin in the refrigerator once it has reached the desired consistency.
How to Heat Cure Rosin

We only recommend heat curing to make rosin jam. Terpene degradation stays minimal as long as the jar is sealed, and every step is covered in our guide on how to make rosin jam.
To heat cure rosin into jam, you'll need a heat-resistant glass jar with a metal lid, an oven with an oven thermometer, and a seedling heat mat with a temperature probe. The process is as follows:
- Fill a jar sized so about 50 grams of rosin fills it to 80%, and seal it. The terpenes evaporate into the headspace and build pressure, so with too little room the lid can pop.
- Preheat the oven to 180 to 200°F, check it with the thermometer, and set the jar in the center. Don’t open the lid from here until the cure is finished.
- Pull the jar right when the rosin goes fully clear after melting down. It melts cloudy first, then starts bubbling, and usually turns fully clear in 30 to 60 minutes depending on the strain and fill level. Let it cook past that point and crystals usually will not form.
- Let the jar cool, then hold it at 100°F for 24 hours: wrap a seedling heat mat around the jar, hold the temperature probe on with a rubber band, and keep the jar upright. Putting the setup inside a cooler helps hold the temperature. The color moves from dark amber toward honey.
- Let the jar reach room temperature before you take the lid off, then stir the jam to a consistent texture.
- After curing, store your rosin in the fridge for short-term storage (1 month) or in the freezer for long-term storage (longer than a month).
Important notes for heat curing:
- Keep the lid of the jar sealed at all times to minimize terpene loss and oxidation.
- Don't agitate the rosin during the heat curing process.
Rosin Curing Tips
There are a few additional tricks for getting the best out of your cured rosin—especially if you plan to market it to consumers.

- Begin with premium hash rosin made from trichome-rich cannabis strains.The depth of flavor you can achieve with rosin cures is directly related to the quality of your starting material.
- Experiment with a range of different strains, curing temperatures, curing times, and whipping frequency. Document the parameters you use for each batch to help you refine your technique and replicate your best results.
- Use straight jars rather than jars that are narrow at the top. This makes it easier to remove the cured rosin from the jar for gramming out, packaging, and distribution.
- Fill jars to about 80% when using Jar Tech. The terpenes need headspace to build pressure, and with too little room the lid can pop.
- Check your rosin every 24 hours when cold curing until the desired consistency is achieved, and whip it once the terpenes have separated. During the oven stage of a heat cure, watch the jar so you can pull it the moment the rosin goes fully clear.
- Let refrigerated jars sit at room temperature for 20 minutes before opening them to prevent unwanted moisture from entering the jar and causing mold and microbial growth. When you open the lid, wipe away any moisture around the inside of the opening to prevent it from falling onto the rosin.
Diversify Your Offerings With Rosin Curing
Curing rosin enhances the gourmet palette of rosin by adding depth and subtlety to the flavor. For extraction businesses, curing enables you to turn a single product—rosin—into an entire line of lucrative SKUs.
As you begin to experiment, remember that the quality of your starting material is key for excellent results no matter which curing process you use. Creating textures and flavors that will wow your customers is then simply a matter of experimenting until you strike gold.